<?xml version='1.0'?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                xmlns:d="http://docbook.org/ns/docbook"
		xmlns:exsl="http://exslt.org/common"
                xmlns:ng="http://docbook.org/docbook-ng"
                xmlns:db="http://docbook.org/ns/docbook"
                xmlns:l="http://docbook.sourceforge.net/xmlns/l10n/1.0"
                exclude-result-prefixes="exsl d"
                version='1.0'>

<!-- ********************************************************************

     This file is part of the XSL DocBook Stylesheet distribution.
     See ../README or http://cdn.docbook.org/release/xsl/current/ for
     copyright and other information.

     ******************************************************************** -->

<!-- * This file contains named templates related to things other than -->
<!-- * just assembling the actual text of the main text flow of each man -->
<!-- * page. This "other" stuff currently amounts to these steps: -->
<!-- * -->
<!-- *  - get contents of the "map" used to convert special characters -->
<!-- *  - output boilerplate messages -->
<!-- *  - escape backslash, dot, dash, and apostrophe characters -->
<!-- *  - convert non-breaking spaces -->
<!-- *  - add a comment to top part of roff source of each page -->
<!-- *  - make a .TH title line (for controlling page header/footer) -->
<!-- *  - set hyphenation, alignment, indent & line-breaking defaults -->
<!-- *  - "prepare" the complete man page contents for final output -->
<!-- *  - write the actual man file to the filesystem -->
<!-- *  - write any "stub" pages to the filesystem -->
<!-- * -->
<!-- * The templates in this file are actually called only once per -->
<!-- * each Refentry; they are just in a separate file for the purpose -->
<!-- * of keeping things modular. -->

<!-- ==================================================================== -->

<!-- ==================================================================== -->
<!-- * Get character map contents -->
<!-- ==================================================================== -->

  <xsl:variable name="man.charmap.contents">
    <xsl:if test="$man.charmap.enabled != 0">
      <xsl:variable name="lang">
        <xsl:call-template name="l10n.language">
          <xsl:with-param name="target" select="//d:refentry[1]"/>
        </xsl:call-template>
      </xsl:variable>
      <xsl:call-template name="read-character-map">
        <xsl:with-param name="use.subset" select="$man.charmap.use.subset"/>
        <xsl:with-param name="subset.profile">
          <xsl:choose>
            <xsl:when test="$lang = 'en'">
              <xsl:value-of select="$man.charmap.subset.profile.english"/>
            </xsl:when>
            <xsl:otherwise>
              <xsl:value-of select="$man.charmap.subset.profile"/>
            </xsl:otherwise>
          </xsl:choose>
        </xsl:with-param>
        <xsl:with-param name="uri">
          <xsl:choose>
            <xsl:when test="$man.charmap.uri != ''">
              <xsl:value-of select="$man.charmap.uri"/>
            </xsl:when>
            <xsl:otherwise>
              <xsl:value-of select="'../manpages/charmap.groff.xsl'"/>
            </xsl:otherwise>
          </xsl:choose>
        </xsl:with-param>
      </xsl:call-template>
    </xsl:if>
  </xsl:variable>

<!-- ==================================================================== -->

<xsl:template name="root.messages">
  <xsl:param name="refname"/>
  <!-- redefine this any way you'd like to output messages -->
  <!-- DO NOT OUTPUT ANYTHING FROM THIS TEMPLATE -->
  <!-- Example:
  <xsl:if test="//d:foo">
    <xsl:call-template name="log.message">
      <xsl:with-param name="level">Warn</xsl:with-param>
      <xsl:with-param name="source" select="$refname"/>
      <xsl:with-param name="context-desc">
        <xsl:text>limitation</xsl:text>
      </xsl:with-param>
      <xsl:with-param name="message">
        <xsl:text>Output for foo element is not yet supported.</xsl:text>
      </xsl:with-param>
    </xsl:call-template>
  </xsl:if>
  -->
</xsl:template>

<!-- ==================================================================== -->
<!-- * Escape roff special chars -->
<!-- ==================================================================== -->

<!-- ******************************************************************** -->
<!-- *  -->
<!-- * The backslash, dot, dash, and apostrophe (\, ., -, ') characters -->
<!-- * have special meaning for roff, so before we do any other -->
<!-- * processing, we must escape those characters where they appear in -->
<!-- * the source content. -->
<!-- *  -->
<!-- * Here we also deal with replacing U+00a0 (non-breaking space) with -->
<!-- * its roff equivalent -->
<!-- *  -->
<!-- ******************************************************************** -->

<xsl:template match="//d:refentry//text()">
  <xsl:call-template name="escape.roff.specials">
    <xsl:with-param name="content">
      <xsl:value-of select="."/>
    </xsl:with-param>
  </xsl:call-template>
</xsl:template>

<xsl:template match="//d:refentry//text()" mode="no.anchor.mode">
  <xsl:call-template name="escape.roff.specials">
    <xsl:with-param name="content">
      <xsl:value-of select="."/>
    </xsl:with-param>
  </xsl:call-template>
</xsl:template>

<xsl:template name="escape.roff.specials">
  <xsl:param name="content"/>
  <xsl:call-template name="convert.nobreak-space">
    <xsl:with-param name="content">
      <xsl:call-template name="escape.apostrophe">
        <xsl:with-param name="content">
          <xsl:call-template name="escape.dash">
            <xsl:with-param name="content">
              <xsl:call-template name="escape.dot">
                <xsl:with-param name="content">
                  <xsl:call-template name="escape.backslash">
                    <xsl:with-param name="content" select="$content"/>
                  </xsl:call-template>
                </xsl:with-param>
              </xsl:call-template>
            </xsl:with-param>
          </xsl:call-template>
        </xsl:with-param>
      </xsl:call-template>
    </xsl:with-param>
  </xsl:call-template>
</xsl:template>

<xsl:template name="escape.backslash">
  <xsl:param name="content"/>
  <xsl:call-template name="string.subst">
    <xsl:with-param name="string" select="$content"/>
    <xsl:with-param name="target">\</xsl:with-param>
    <!-- * we use "\e" instead of "\\" because the groff docs say -->
    <!-- * that's the correct thing to do; also because testing -->
    <!-- * shows that "\\" doesn't always work as expected; for -->
    <!-- * example, "\\" within a table seems to mess things up -->
    <xsl:with-param name="replacement">\e</xsl:with-param>
  </xsl:call-template>
</xsl:template>

<xsl:template name="escape.dot">
  <xsl:param name="content"/>
  <xsl:call-template name="string.subst">
    <xsl:with-param name="string" select="$content"/>
    <xsl:with-param name="target">.</xsl:with-param>
    <xsl:with-param name="replacement">\&amp;.</xsl:with-param>
  </xsl:call-template>
</xsl:template>

<xsl:template name="escape.dash">
  <xsl:param name="content"/>
  <xsl:call-template name="string.subst">
    <xsl:with-param name="string" select="$content"/>
    <xsl:with-param name="target">-</xsl:with-param>
    <xsl:with-param name="replacement">\-</xsl:with-param>
  </xsl:call-template>
</xsl:template>

<xsl:template name="escape.apostrophe">
  <xsl:param name="content"/>
  <xsl:call-template name="string.subst">
    <xsl:with-param name="string" select="$content"/>
    <xsl:with-param name="target">'</xsl:with-param>
    <xsl:with-param name="replacement">\*(Aq</xsl:with-param>
  </xsl:call-template>
</xsl:template>

<xsl:template name="convert.nobreak-space">
  <xsl:param name="content"/>
  <xsl:call-template name="string.subst">
    <xsl:with-param name="string" select="$content"/>
    <xsl:with-param name="target">&#x00a0;</xsl:with-param>
    <!-- * A no-break space can be written two ways in roff; the -->
    <!-- * difference, according to the "Page Motions" node in the -->
    <!-- * groff info page, is: -->
    <!-- *  -->
    <!-- *   "\ " = -->
    <!-- *   An unbreakable and unpaddable (i.e. not expanded -->
    <!-- *   during filling) space. -->
    <!-- *  -->
    <!-- *   "\~" = -->
    <!-- *   An unbreakable space that stretches like a normal -->
    <!-- *   inter-word space when a line is adjusted."  -->
    <!-- *  -->
    <!-- * Unfortunately, roff seems to do some weird things with -->
    <!-- * long lines that only have words separated by "\~" -->
    <!-- * spaces, so it's safer just to stick with the "\ " space -->
    <!-- *  -->
    <!-- * We append a "\&" to handle the case of a no-break space that -->
    <!-- * appears at the end of a line - because later processing will -->
    <!-- * cause that space to get eaten otherwise. -->
    <xsl:with-param name="replacement">\ \&amp;</xsl:with-param>
  </xsl:call-template>
</xsl:template>

<!-- ==================================================================== -->

<!-- * top.comment generates a comment containing metadata for the man -->
<!-- * page; for example, Author, Generator, and Date information -->

  <xsl:template name="top.comment">
    <xsl:param name="info"/>
    <xsl:param name="date"/>
    <xsl:param name="title"/>
    <xsl:param name="manual"/>
    <xsl:param name="source"/>
    <xsl:param name="refname"/>
    <xsl:text>.\"     Title: </xsl:text>
    <xsl:call-template name="replace.dots.and.dashes">
      <xsl:with-param name="content" select="$title"/>
    </xsl:call-template>
    <xsl:text>&#10;</xsl:text>
    <xsl:text>.\"    Author: </xsl:text>
    <xsl:call-template name="replace.dots.and.dashes">
      <xsl:with-param name="content">
        <xsl:call-template name="make.roff.metadata.author">
          <xsl:with-param name="info" select="$info"/>
          <xsl:with-param name="refname" select="$refname"/>
        </xsl:call-template>
      </xsl:with-param>
    </xsl:call-template>
    <xsl:text>&#10;</xsl:text>
    <xsl:text>.\" Generator: DocBook </xsl:text>
    <xsl:value-of select="$DistroTitle"/>
    <xsl:text> v</xsl:text>
    <xsl:call-template name="replace.dots.and.dashes">
      <xsl:with-param name="content" select="$VERSION"/>
    </xsl:call-template>
    <xsl:text> &lt;http://docbook.sf.net/></xsl:text>
    <xsl:text>&#10;</xsl:text>
    <xsl:text>.\"      Date: </xsl:text>
    <xsl:call-template name="replace.dots.and.dashes">
      <xsl:with-param name="content" select="$date"/>
    </xsl:call-template>
    <xsl:text>&#10;</xsl:text>
    <xsl:text>.\"    Manual: </xsl:text>
    <xsl:call-template name="replace.dots.and.dashes">
      <xsl:with-param name="content" select="$manual"/>
    </xsl:call-template>
    <xsl:text>&#10;</xsl:text>
    <xsl:text>.\"    Source: </xsl:text>
    <xsl:call-template name="replace.dots.and.dashes">
      <xsl:with-param name="content" select="$source"/>
    </xsl:call-template>
    <xsl:text>&#10;</xsl:text>
    <xsl:text>.\"  Language: </xsl:text>
    <xsl:call-template name="l10n.language.name"/>
    <xsl:text>&#10;</xsl:text>
    <xsl:text>.\"</xsl:text>
    <xsl:text>&#10;</xsl:text>
  </xsl:template>

<!-- ==================================================================== -->

  <xsl:template name="TH.title.line">

    <!-- * The exact way that .TH contents are displayed is system- -->
    <!-- * dependent; it varies somewhat between OSes and roff -->
    <!-- * versions. Below is a description of how Linux systems with -->
    <!-- * a modern groff seem to render .TH contents. -->
    <!-- * -->
    <!-- *   title(section)  extra3  title(section)  <- page header -->
    <!-- *   extra2          extra1  title(section)  <- page footer-->
    <!-- * -->
    <!-- * Or, using the names with which the man(7) man page refers -->
    <!-- * to the various fields: -->
    <!-- * -->
    <!-- *   title(section)  manual  title(section)  <- page header -->
    <!-- *   source          date    title(section)  <- page footer-->
    <!-- * -->
    <!-- * Note that while extra1, extra2, and extra3 are all (nominally) -->
    <!-- * optional, in practice almost all pages include an "extra1" -->
    <!-- * field, which is, universally, a date (in some form), and it is -->
    <!-- * always rendered in the same place (the middle footer position) -->
    <!-- * -->
    <!-- * Here are a couple of examples of real-world man pages that -->
    <!-- * have somewhat useful page headers/footers: -->
    <!-- * -->
    <!-- *   gtk-options(7)    GTK+ User's Manual   gtk-options(7) -->
    <!-- *   GTK+ 1.2              2003-10-20       gtk-options(7) -->
    <!-- * -->
    <!-- *   svgalib(7)       Svgalib User Manual       svgalib(7) -->
    <!-- *   Svgalib 1.4.1      16 December 1999        svgalib(7) -->
    <!-- * -->
    <xsl:param name="title"/>
    <xsl:param name="section"/>
    <xsl:param name="extra1"/>
    <xsl:param name="extra2"/>
    <xsl:param name="extra3"/>

    <xsl:call-template name="mark.subheading"/>
    <!-- * Note that we generate quotes around _every_ field in the -->
    <!-- * .TH title line, including the "title" and "section" -->
    <!-- * fields. That is because we use the contents of those "as -->
    <!-- * is", unchanged from the DocBook source; and DTD-based -->
    <!-- * validation does not provide a way to constrain them to be -->
    <!-- * "space free" -->
    <xsl:text>.TH "</xsl:text>
    <xsl:call-template name="string.upper">
      <xsl:with-param name="string">
        <xsl:choose>
          <xsl:when test="$man.th.title.max.length != ''">
            <xsl:value-of
                select="normalize-space(substring($title, 1, $man.th.title.max.length))"/>
          </xsl:when>
          <xsl:otherwise>
            <xsl:value-of select="normalize-space($title)"/>
          </xsl:otherwise>
        </xsl:choose>
      </xsl:with-param>
    </xsl:call-template>
    <xsl:text>" "</xsl:text>
    <xsl:value-of select="normalize-space($section)"/>
    <xsl:text>" "</xsl:text>
    <xsl:if test="$man.th.extra1.suppress = 0">
      <!-- * there is no max.length for the extra1 field; the reason -->
      <!-- * is, it is almost always a date, and it is not possible -->
      <!-- * to truncate dates without changing their meaning -->
      <xsl:value-of select="normalize-space($extra1)"/>
    </xsl:if>
    <xsl:text>" "</xsl:text>
    <xsl:if test="$man.th.extra2.suppress = 0">
      <xsl:choose>
        <!-- * if max.length is non-empty, use value to truncate field -->
        <xsl:when test="$man.th.extra2.max.length != ''">
          <xsl:value-of
              select="normalize-space(substring($extra2, 1, $man.th.extra2.max.length))"/>
        </xsl:when>
        <xsl:otherwise>
          <xsl:value-of select="normalize-space($extra2)"/>
        </xsl:otherwise>
      </xsl:choose>
    </xsl:if>
    <xsl:text>" "</xsl:text>
    <xsl:if test="$man.th.extra3.suppress = 0">
      <xsl:choose>
        <!-- * if max.length is non-empty, use value to truncate field -->
        <xsl:when test="$man.th.extra3.max.length != ''">
          <xsl:value-of
              select="normalize-space(substring($extra3, 1, $man.th.extra3.max.length))"/>
        </xsl:when>
        <xsl:otherwise>
          <xsl:value-of select="normalize-space($extra3)"/>
        </xsl:otherwise>
      </xsl:choose>
    </xsl:if>
    <xsl:text>"&#10;</xsl:text>
    <xsl:call-template name="mark.subheading"/>
  </xsl:template>

  <!-- ============================================================== -->

  <xsl:template name="set.default.formatting">
    <!-- * Set default hyphenation, justification, indentation and -->
    <!-- * line-breaking -->
    <!-- * -->
    <!-- * If the value of man.hypenate is zero (the default), then -->
    <!-- * disable hyphenation (".nh" = "no hyphenation") -->
    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
    <xsl:text>.\" * set default formatting&#10;</xsl:text>
    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
    <xsl:if test="$man.hyphenate = 0">
      <xsl:text>.\" disable hyphenation&#10;</xsl:text>
      <xsl:text>.nh&#10;</xsl:text>
    </xsl:if>
    <!-- * If the value of man.justify is zero (the default), then -->
    <!-- * disable justification (".ad l" means "adjust to left only") -->
    <xsl:if test="$man.justify = 0">
      <xsl:text>.\" disable justification</xsl:text>
      <xsl:text> (adjust text to left margin only)&#10;</xsl:text>
      <xsl:text>.ad l&#10;</xsl:text>
    </xsl:if>
    <xsl:if test="not($man.indent.refsect = 0)">
      <xsl:text>.\" store initial "default indentation value"&#10;</xsl:text>
      <xsl:text>.nr zq \n(IN&#10;</xsl:text>
      <xsl:text>.\" adjust default indentation&#10;</xsl:text>
      <xsl:text>.nr IN </xsl:text>
      <xsl:value-of select="$man.indent.width"/>
      <xsl:text>&#10;</xsl:text>
      <xsl:text>.\" adjust indentation of SS headings&#10;</xsl:text>
      <xsl:text>.nr SN \n(IN&#10;</xsl:text>
    </xsl:if>
    <!-- * Unless the value of man.break.after.slash is zero (the -->
    <!-- * default), tell groff that it is OK to break a line -->
    <!-- * after a slash when needed. -->
    <xsl:if test="$man.break.after.slash != 0">
      <xsl:text>.\" enable line breaks after slashes&#10;</xsl:text>
      <xsl:text>.cflags 4 /&#10;</xsl:text>
    </xsl:if>
  </xsl:template>

  <!-- ================================================================== -->

  <!-- * The prepare.manpage.contents template is called after all -->
  <!-- * other processing has been done, before serializing the -->
  <!-- * result of all the other processing. It basically works on -->
  <!-- * the result as one big string. -->
  <xsl:template name="prepare.manpage.contents">
    <xsl:param name="content" select="''"/>

    <!-- * If user has provided a "local" string-substitution map to -->
    <!-- * be applied /before/ the standard string-substitution map, -->
    <!-- * apply it. -->
    <xsl:variable name="pre.adjusted.content">
      <xsl:choose>
        <xsl:when test="$man.string.subst.map.local.pre">
          <!-- * normalized value of man.string.subst.map.local.pre -->
          <!-- * is non-empty, so get contents of map and apply them -->
          <xsl:call-template name="apply-string-subst-map">
            <xsl:with-param name="content" select="$content"/>
            <xsl:with-param name="map.contents"
                            select="exsl:node-set($man.string.subst.map.local.pre)/*"/>
          </xsl:call-template>
        </xsl:when>
        <xsl:otherwise>
          <!-- * value of man.string.subst.map.local.pre is empty, -->
          <!-- * so just copy original contents -->
          <xsl:value-of select="$content"/>
        </xsl:otherwise>
      </xsl:choose>
    </xsl:variable>

    <!-- * Apply standard string-substitution map. The main purpose -->
    <!-- * of this map is to escape certain characters that have -->
    <!-- * special meaning in roff, and to replace certain characters -->
    <!-- * used within the stylesheet internally to represent roff -->
    <!-- * markup characters. -->
    <xsl:variable name="adjusted.content">
      <xsl:call-template name="apply-string-subst-map">
        <xsl:with-param name="content" select="$pre.adjusted.content"/>
        <xsl:with-param name="map.contents"
                        select="exsl:node-set($man.string.subst.map)/*"/>
      </xsl:call-template>
    </xsl:variable>

    <!-- * If user has provided a "local" string-substitution map to -->
    <!-- * be applied /after/ the standard string-substitution map, -->
    <!-- * apply it. -->
    <xsl:variable name="post.adjusted.content">
      <xsl:choose>
        <xsl:when test="$man.string.subst.map.local.post">
          <!-- * normalized value of man.string.subst.map.local.post -->
          <!-- * is non-empty, so get contents of map and apply them -->
          <xsl:call-template name="apply-string-subst-map">
            <xsl:with-param name="content" select="$adjusted.content"/>
            <xsl:with-param name="map.contents"
                            select="exsl:node-set($man.string.subst.map.local.post)/*"/>
          </xsl:call-template>
        </xsl:when>
        <xsl:otherwise>
          <!-- * value of man.string.subst.map.local.post is empty, -->
          <!-- * so just copy original contents -->
          <xsl:value-of select="$adjusted.content"/>
        </xsl:otherwise>
      </xsl:choose>
    </xsl:variable>

    <!-- * Optionally, apply a character map to replace Unicode -->
    <!-- * symbols and special characters. -->
    <xsl:choose>
      <xsl:when test="$man.charmap.enabled != 0">
        <xsl:call-template name="apply-character-map">
          <xsl:with-param name="content" select="$post.adjusted.content"/>
          <xsl:with-param name="map.contents"
                          select="exsl:node-set($man.charmap.contents)/*"/>
        </xsl:call-template>
      </xsl:when>
      <xsl:otherwise>
        <!-- * if we reach here, value of $man.charmap.enabled is zero, -->
        <!-- * so we just pass the adjusted contents through "as is" -->
        <xsl:value-of select="$adjusted.content"/>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:template>

  <!-- ================================================================== -->
  
  <xsl:template name="write.man.file">
    <xsl:param name="name"/>
    <xsl:param name="section"/>
    <xsl:param name="lang"/>
    <xsl:param name="content"/>
    <xsl:param name="filename">
      <xsl:call-template name="make.adjusted.man.filename">
        <xsl:with-param name="name" select="$name"/>
        <xsl:with-param name="section" select="$section"/>
        <xsl:with-param name="lang" select="$lang"/>
      </xsl:call-template>
    </xsl:param>
    <xsl:call-template name="write.text.chunk">
      <xsl:with-param name="filename" select="$filename"/>
      <xsl:with-param name="suppress-context-node-name" select="1"/>
      <xsl:with-param name="quiet" select="$man.output.quietly"/>
      <xsl:with-param
          name="message-prolog"
          >Note: </xsl:with-param>
      <xsl:with-param name="encoding" select="$man.output.encoding"/>
      <xsl:with-param name="content" select="$content"/>
    </xsl:call-template>
  </xsl:template>

  <!-- ============================================================== -->

  <!-- * A "stub" is sort of alias for another file, intended to be read -->
  <!-- * and expanded by soelim(1); it's simply a file whose complete -->
  <!-- * contents are just a single line of the following form: -->
  <!-- * -->
  <!-- *  .so manX/realname.X -->
  <!-- * -->
  <!-- * "realname" is a name of another man-page file. That .so line is -->
  <!-- * basically a roff "include" statement.  When the man command finds -->
  <!-- * it, it calls soelim(1) and includes and displays the contents of -->
  <!-- * the manX/realqname.X file. -->
  <!-- * -->
  <!-- * If a refentry has multiple refnames, we generate a "stub" page for -->
  <!-- * each refname found, except for the first one. -->
  <xsl:template name="write.stubs">
    <xsl:param name="first.refname"/>
    <xsl:param name="section"/>
    <xsl:param name="lang"/>
    <xsl:for-each select="d:refnamediv/d:refname">
      <xsl:if test=". != $first.refname">
        <xsl:call-template name="write.text.chunk">
          <xsl:with-param name="filename">
            <xsl:call-template name="make.adjusted.man.filename">
              <xsl:with-param name="name" select="."/>
              <xsl:with-param name="section" select="$section"/>
              <xsl:with-param name="lang" select="$lang"/>
            </xsl:call-template>
          </xsl:with-param>
          <xsl:with-param name="quiet" select="$man.output.quietly"/>
          <xsl:with-param name="suppress-context-node-name" select="1"/>
          <xsl:with-param name="message-prolog">Note: </xsl:with-param>
          <xsl:with-param name="message-epilog"> (soelim stub)</xsl:with-param>
          <xsl:with-param name="content">
            <xsl:value-of select="'.so '"/>
            <xsl:variable name="full.filename">
              <xsl:call-template name="make.adjusted.man.filename">
                <xsl:with-param name="name" select="$first.refname"/>
                <xsl:with-param name="section" select="$section"/>
                <xsl:with-param name="lang" select="$lang"/>
              </xsl:call-template>
            </xsl:variable>
            <xsl:choose>
              <xsl:when test="starts-with($full.filename, $man.output.base.dir)">
                <xsl:value-of 
                   select="substring-after($full.filename,$man.output.base.dir)"/>
              </xsl:when>
              <xsl:otherwise>
                <xsl:value-of select="$full.filename"/>
              </xsl:otherwise>
            </xsl:choose>
            <xsl:text>&#10;</xsl:text>
          </xsl:with-param>
        </xsl:call-template>
      </xsl:if>
    </xsl:for-each>
  </xsl:template>

  <!-- ============================================================== -->

  <!-- *  A manifest file is useful for doing "make clean" during -->
  <!-- *  builds and for other purposes. When we make the manifest -->
  <!-- *  file, we need to include in it a filename for each man-page -->
  <!-- *  generated, including any "stub" pages. -->
  <xsl:template name="generate.manifest">
    <xsl:variable name="filelist">
      <xsl:for-each select="//d:refentry">
        <!-- * all refname instances in a Refentry inherit their section -->
        <!-- * numbers from the parent Refentry; so we only need to get -->
        <!-- * the section once per Refentry, not once per Refname -->
        <xsl:variable name="section">
          <xsl:call-template name="get.refentry.section">
            <xsl:with-param name="quiet" select="1"/>
          </xsl:call-template>
        </xsl:variable>
        <xsl:variable name="lang">
          <xsl:call-template name="l10n.language"/>
        </xsl:variable>
        <xsl:for-each select="d:refnamediv/d:refname">
          <xsl:call-template name="make.adjusted.man.filename">
            <xsl:with-param name="name" select="."/>
            <xsl:with-param name="section" select="$section"/>
            <xsl:with-param name="lang" select="$lang"/>
          </xsl:call-template>
          <xsl:text>&#10;</xsl:text>
        </xsl:for-each>
      </xsl:for-each>
    </xsl:variable>

    <!-- * we write the manifest file once per document, not once per -->
    <!-- * Refentry -->
    <xsl:call-template name="write.text.chunk">
      <xsl:with-param name="filename">
        <xsl:value-of select="$man.output.manifest.filename"/>
      </xsl:with-param>
      <xsl:with-param name="quiet" select="1"/>
      <xsl:with-param name="message-prolog">Note: </xsl:with-param>
      <xsl:with-param name="message-epilog"> (manifest file)</xsl:with-param>
      <xsl:with-param name="content">
        <xsl:value-of select="$filelist"/>
      </xsl:with-param>
    </xsl:call-template>
    <xsl:if test="$man.output.quietly = 0">
      <xsl:message><xsl:text>&#10;</xsl:text></xsl:message>
    </xsl:if>
  </xsl:template>

  <!-- ============================================================== -->

  <!-- There is some stuff, that is not portable between groff/troff. -->
  <xsl:template name="define.portability.macros">
    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
    <xsl:text>.\" * Define some portability stuff&#10;</xsl:text>
    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.\" http://bugs.debian.org/507673&#10;</xsl:text>
    <xsl:text>.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>&#10;</xsl:text>
    <xsl:text>.ie \n(.g .ds Aq \(aq</xsl:text>
    <xsl:text>&#10;</xsl:text>
    <xsl:text>.el       .ds Aq '</xsl:text>
    <xsl:text>&#10;</xsl:text>
  </xsl:template>

  <!-- ============================================================== -->

  <xsl:template name="define.macros">
    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
    <xsl:text>.\" * (re)Define some macros&#10;</xsl:text>
    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.\" toupper - uppercase a string (locale-aware)&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.de toupper&#10;</xsl:text>
    <xsl:text>.tr</xsl:text>
    <xsl:text> </xsl:text>
    <xsl:call-template name="make.tr.uppercase.arg"/>
    <xsl:text>\\$*&#10;</xsl:text>
    <xsl:text>.tr</xsl:text>
    <xsl:text> </xsl:text>
    <xsl:call-template name="make.tr.normalcase.arg"/>
    <xsl:text>..&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.\" SH-xref - format a cross-reference to an SH section&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.de SH-xref
.ie n \{\
.\}
.toupper \\$*
.el \{\
\\$*
.\}
..&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.\" SH - level-one heading that works better for non-TTY output&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.de1 SH&#10;</xsl:text>
    <xsl:text>.\" put an extra blank line of space above the head in non-TTY output&#10;</xsl:text>
    <xsl:call-template name="roff-if-start">
      <xsl:with-param name="condition">t</xsl:with-param>
    </xsl:call-template>
    <xsl:text>.sp 1&#10;</xsl:text>
    <xsl:call-template name="roff-if-end"/>
    <xsl:text>.sp \\n[PD]u
.nr an-level 1
.set-an-margin
.nr an-prevailing-indent \\n[IN]
.fi
.in \\n[an-margin]u
.ti 0
.HTML-TAG ".NH \\n[an-level]"
.it 1 an-trap
.nr an-no-space-flag 1
.nr an-break-flag 1
\." make the size of the head bigger
.ps +3
.ft B
.ne (2v + 1u)
.ie n \{\
.\" if n (TTY output), use uppercase
.toupper \\$*
.\}
.el \{\
.nr an-break-flag 0
.\" if not n (not TTY), use normal case (not uppercase)
\\$1
.in \\n[an-margin]u
.ti 0
.\" if not n (not TTY), put a border/line under subheading
.sp -.6
\l'\n(.lu'
.\}
..&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.\" SS - level-two heading that works better for non-TTY output&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.de1 SS
.sp \\n[PD]u
.nr an-level 1
.set-an-margin
.nr an-prevailing-indent \\n[IN]
.fi
.in \\n[IN]u
.ti \\n[SN]u
.it 1 an-trap
.nr an-no-space-flag 1
.nr an-break-flag 1
.ps \\n[PS-SS]u
\." make the size of the head bigger
.ps +2
.ft B
.ne (2v + 1u)
.if \\n[.$] \&amp;\\$*
..&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.\" BB/EB - put background/screen (filled box) around block of text&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.de BB
.if t \{\
.sp -.5
.br
.in +2n
.ll -2n
.gcolor red
.di BX
.\}
..
.de EB
.if t \{\
.if "\\$2"adjust-for-leading-newline" \{\
.sp -1
.\}
.br
.di
.in
.ll
.gcolor
.nr BW \\n(.lu-\\n(.i
.nr BH \\n(dn+.5v
.ne \\n(BHu+.5v
.ie "\\$2"adjust-for-leading-newline" \{\
\M[\\$1]\h'1n'\v'+.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
.\}
.el \{\
\M[\\$1]\h'1n'\v'-.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
.\}
.in 0
.sp -.5v
.nf
.BX
.in
.sp .5v
.fi
.\}
..&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.\" BM/EM - put colored marker in margin next to block of text&#10;</xsl:text>
    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
    <xsl:text>.de BM
.if t \{\
.br
.ll -2n
.gcolor red
.di BX
.\}
..
.de EM
.if t \{\
.br
.di
.ll
.gcolor
.nr BH \\n(dn
.ne \\n(BHu
\M[\\$1]\D'P -.75n 0 0 \\n(BHu -(\\n[.i]u - \\n(INu - .75n) 0 0 -\\n(BHu'\M[]
.in 0
.nf
.BX
.in
.fi
.\}
..&#10;</xsl:text>
</xsl:template>

<xsl:template name="make.tr.uppercase.arg">
  <xsl:call-template name="string.shuffle">
    <xsl:with-param name="string1">
      <xsl:call-template name="gentext">
        <xsl:with-param name="key" select="'lowercase.alpha'"/>
      </xsl:call-template>
    </xsl:with-param>
    <xsl:with-param name="string2">
      <xsl:call-template name="gentext">
        <xsl:with-param name="key" select="'uppercase.alpha'"/>
      </xsl:call-template>
    </xsl:with-param>
  </xsl:call-template>
  <xsl:text>&#10;</xsl:text>
</xsl:template>

<xsl:template name="make.tr.normalcase.arg">
  <xsl:call-template name="string.shuffle">
    <xsl:with-param name="string1">
      <xsl:call-template name="gentext">
        <xsl:with-param name="key" select="'lowercase.alpha'"/>
      </xsl:call-template>
    </xsl:with-param>
    <xsl:with-param name="string2">
      <xsl:call-template name="gentext">
        <xsl:with-param name="key" select="'lowercase.alpha'"/>
      </xsl:call-template>
    </xsl:with-param>
  </xsl:call-template>
  <xsl:text>&#10;</xsl:text>
</xsl:template>

<xsl:template name="string.shuffle">
  <!-- * given two strings, "shuffle" them together into one -->
  <xsl:param name="string1"/>
  <xsl:param name="string2"/>
  <xsl:value-of select="substring($string1, 1, 1)"/>
  <xsl:value-of select="substring($string2, 1, 1)"/>
  <xsl:if test="string-length($string1) > 1">
    <xsl:call-template name="string.shuffle">
      <xsl:with-param name="string1">
        <xsl:value-of select="substring($string1, 2)"/>
      </xsl:with-param>
      <xsl:with-param name="string2">
        <xsl:value-of select="substring($string2, 2)"/>
      </xsl:with-param>
    </xsl:call-template>
  </xsl:if>
</xsl:template>

</xsl:stylesheet>
